turn on optimization flags for the C compiler

2005-05-30

Steven G. Johnson <stevenj@alum.mit.edu> and Matteo Frigo.

GPLWithACException
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation. As a special exception, the respective Autoconf Macro's copyright owner gives unlimited permission to copy, distribute and modify the configure scripts that are the output of Autoconf when processing the Macro. You need not follow the terms of the GNU General Public License when using or distributing such scripts

cryp.to ac-archive's C Support (released)

Try to turn on "good" C optimization flags for various compilers and architectures, for some definition of "good". (In our case, good for FFTW and hopefully for other scientific codes. Modify as needed.)

The user can override the flags by setting the CFLAGS environment variable. The user can also specify --enable-portable-binary in order to disable any optimization flags that might result in a binary that only runs on the host architecture.

Note also that the flags assume that ANSI C aliasing rules are followed by the code (e.g. for gcc's -fstrict-aliasing), and that floating-point computations can be re-ordered as needed.

Requires macros: AX_CHECK_COMPILER_FLAGS, AX_COMPILER_VENDOR, AX_GCC_ARCHFLAG, AX_GCC_X86_CPUID.

AC_DEFUN([AX_CC_MAXOPT],
[
AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([AX_COMPILER_VENDOR])
AC_REQUIRE([AC_CANONICAL_HOST])

AC_ARG_ENABLE(portable-binary, [AC_HELP_STRING([--enable-portable-binary], [disable compiler optimizations that would produce unportable binaries])],
	acx_maxopt_portable=$withval, acx_maxopt_portable=no)

# Try to determine "good" native compiler flags if none specified via CFLAGS
if test "$ac_test_CFLAGS" != "set"; then
  CFLAGS=""
  case $ax_cv_c_compiler_vendor in
    dec) CFLAGS="-newc -w0 -O5 -ansi_alias -ansi_args -fp_reorder -tune host"
	 if test "x$acx_maxopt_portable" = xno; then
           CFLAGS="$CFLAGS -arch host"
         fi;;

    sun) CFLAGS="-native -fast -xO5 -dalign"
	 if test "x$acx_maxopt_portable" = xyes; then
	   CFLAGS="$CFLAGS -xarch=generic"
         fi;;

    hp)  CFLAGS="+Oall +Optrs_ansi +DSnative"
	 if test "x$acx_maxopt_portable" = xyes; then
	   CFLAGS="$CFLAGS +DAportable"
	 fi;;

    ibm) if test "x$acx_maxopt_portable" = xno; then
           xlc_opt="-qarch=auto -qtune=auto"
	 else
           xlc_opt="-qtune=auto"
	 fi
         AX_CHECK_COMPILER_FLAGS($xlc_opt,
         	CFLAGS="-O3 -qansialias -w $xlc_opt",
               [CFLAGS="-O3 -qansialias -w"
                echo "******************************************************"
                echo "*  You seem to have the IBM  C compiler.  It is      *"
                echo "*  recommended for best performance that you use:    *"
                echo "*                                                    *"
                echo "*    CFLAGS=-O3 -qarch=xxx -qtune=xxx -qansialias -w *"
                echo "*                      ^^^        ^^^                *"
                echo "*  where xxx is pwr2, pwr3, 604, or whatever kind of *"
                echo "*  CPU you have.  (Set the CFLAGS environment var.   *"
                echo "*  and re-run configure.)  For more info, man cc.    *"
                echo "******************************************************"])
         ;;

    intel) CFLAGS="-O3 -ansi_alias"
	if test "x$acx_maxopt_portable" = xno; then
	  icc_archflag=unknown
	  icc_flags=""
	  case $host_cpu in
	    i686*|x86_64*)
              # icc accepts gcc assembly syntax, so these should work:
	      AX_GCC_X86_CPUID(0)
              AX_GCC_X86_CPUID(1)
	      case $ax_cv_gcc_x86_cpuid_0 in # see AX_GCC_ARCHFLAG
                *:756e6547:*:*) # Intel
                  case $ax_cv_gcc_x86_cpuid_1 in
                    *6a?:*[[234]]:*:*|*6[[789b]]?:*:*:*) icc_flags="-xK";;
                    *f3[[347]]:*:*:*|*f4[1347]:*:*:*) icc_flags="-xP -xN -xW -xK";;
                    *f??:*:*:*) icc_flags="-xN -xW -xK";;
                  esac ;;
              esac ;;
          esac
          if test "x$icc_flags" != x; then
            for flag in $icc_flags; do
              AX_CHECK_COMPILER_FLAGS($flag, [icc_archflag=$flag; break])
            done
          fi
          AC_MSG_CHECKING([for icc architecture flag])
	  AC_MSG_RESULT($icc_archflag)
          if test "x$icc_archflag" != xunknown; then
            CFLAGS="$CFLAGS $icc_archflag"
          fi
        fi
	;;

    gnu)
     # default optimization flags for gcc on all systems
     CFLAGS="-O3 -fomit-frame-pointer"

     # -malign-double for x86 systems
     AX_CHECK_COMPILER_FLAGS(-malign-double, CFLAGS="$CFLAGS -malign-double")

     #  -fstrict-aliasing for gcc-2.95+
     AX_CHECK_COMPILER_FLAGS(-fstrict-aliasing,
	CFLAGS="$CFLAGS -fstrict-aliasing")

     # note that we enable "unsafe" fp optimization with other compilers, too
     AX_CHECK_COMPILER_FLAGS(-ffast-math, CFLAGS="$CFLAGS -ffast-math")

     AX_GCC_ARCHFLAG($acx_maxopt_portable)
     ;;
  esac

  if test -z "$CFLAGS"; then
	echo ""
	echo "********************************************************"
        echo "* WARNING: Don't know the best CFLAGS for this system  *"
        echo "* Use ./configure CFLAGS=... to specify your own flags *"
	echo "* (otherwise, a default of CFLAGS=-O3 will be used)    *"
	echo "********************************************************"
	echo ""
        CFLAGS="-O3"
  fi

  AX_CHECK_COMPILER_FLAGS($CFLAGS, [], [
	echo ""
        echo "********************************************************"
        echo "* WARNING: The guessed CFLAGS don't seem to work with  *"
        echo "* your compiler.                                       *"
        echo "* Use ./configure CFLAGS=... to specify your own flags *"
        echo "********************************************************"
        echo ""
        CFLAGS=""
  ])

fi
])